The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Supplied with the SM6 shock mount, dust cover, microphone cable and downloadable instructional video hosted by Grammy-nominated engineer and producer John Merchant.
Features
check_circle_outline
Large 1” HF1 gold sputtered capsule
check_circle_outline
On body control of polar pattern, HPF and PAD
check_circle_outline
Three position variable polar pattern - Omni (picks up all sides equally), Cardioid (picks up audio from the front and sides and rejects from the rear) or Figure 8 (picks up from the front and rear and rejects sides)
check_circle_outline
Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
check_circle_outline
Three position PAD - 0dB, -5dB or -10dB
check_circle_outline
Ultra low noise
check_circle_outline
Internal capsule shock mounting
check_circle_outline
Includes RØDE SM6 shock mount, pop filter and dust cover
check_circle_outline
Designed and manufactured in Australia
Specifications Rode NT2-A Studio Solution Set Microphone
Specifications
Acoustic Principle
Pressure gradient
info_outline Indica que o microfone tem um conversor de impedância.
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
1.00"
info_outline Indica o alcance de frequências em que o produto trabalha, geralmente medido em hertz (Hz), kilohertz (kHz) ou Gigahertz (GHz).
Frequency Range
20Hz - 20kHz
info_outline A impedância de saída indica-nos se o sinal que sai do pedal é sinal de instrumento ou de linha.
Output Impedance
200Ω
info_outline Nível máximo de saída do sinal (medido em dB).
Maximum Output Level
16.0mV (@ 1kHz, 1% THD into 1KΩ load)
info_outline A sensibilidade indica-nos a forma como o equipamento reage a um dado volume, dando-nos assim uma ideia do tipo de usos que serão mais ou menos apropriados.
Sensitivity
-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
info_outline Indica os valores do ruido do microfone. Exemplo 21dBA
Equivalent Noise Level (A-weighted)
7dBA
info_outline Formas de fornecer energia ao produto/instrumento.
Power Options
+24V / +48V phantom power required from mixer or interface
info_outline Item weight. Usually given in Kg (or Pounds). Sometimes also other types of indications, such as for drum cymbals, for example.