The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Features
check_circle_outline
Polar pattern: cardioid
check_circle_outline
Ideal for recording strings, choir and acoustic guitars
check_circle_outline
Frequency range: 40 - 20,000 Hz
check_circle_outline
130 dB SPL
check_circle_outline
21 dBA Inherent noise
check_circle_outline
Output impedance: 200 Ohm
check_circle_outline
48V Phantom power or battery power (9 V battery)
check_circle_outline
Robust metal housing
check_circle_outline
Elastic mounted 1/2" capsule
check_circle_outline
Switchable high pass filter
check_circle_outline
Switchable preattenuation (-10 dB/ -20 dB)
check_circle_outline
Length: 225 mm
check_circle_outline
Diameter: 33 mm
check_circle_outline
Weight: 360 g
check_circle_outline
Incl. wind shield and clamp
Specifications Rode M3 Microphone
Specifications
Acoustic Principle
Pressure gradient
info_outline Indica que o microfone tem um conversor de impedância.
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
0.50"
info_outline Define o tipo de posição que o microfone usa para captar o som.
Address Type
End
info_outline Indica o alcance de frequências em que o produto trabalha, geralmente medido em hertz (Hz), kilohertz (kHz) ou Gigahertz (GHz).
Frequency Range
40Hz - 20kHz (selected HPF @80Hz)
info_outline A impedância de saída indica-nos se o sinal que sai do pedal é sinal de instrumento ou de linha.
Output Impedance
200Ω
info_outline O nível de pressão sonora máxima emitida pelo sistema, normalmente expresso em dB.
Maximum SPL
142dBSPL
info_outline Nível máximo de saída do sinal (medido em dB).
Maximum Output Level
9.2mV (@ 1kHz, 1% THD into 1KΩ load)
info_outline A sensibilidade indica-nos a forma como o equipamento reage a um dado volume, dando-nos assim uma ideia do tipo de usos que serão mais ou menos apropriados.
Sensitivity
-40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
info_outline Indica os valores do ruido do microfone. Exemplo 21dBA
Equivalent Noise Level (A-weighted)
21dBA
info_outline Item weight. Usually given in Kg (or Pounds). Sometimes also other types of indications, such as for drum cymbals, for example.
Weight
390.00g
info_outline Apresenta as dimensões totais do produto, habitualmente em centímetros milímetros ou polegadas.
Dimensions
225.00mmH x 33.00mmW x 33.00mmD
info_outline Tipo de garantia oferecida pela marca no produto em questão.
Warranty
1 year with free extension to 10 years following registration