Parche para Bombo 22" REMO BB112200 EMPEROR COATED
KNA
KNA BP1 banjo pickup

KNA BP1 banjo pickup

60 €

Agotado

Acumula los descuentos para tu tarjeta

lojaIcon
VER STOCK TIENDAS
1
Pagamentos
Ver todas las opciones y medios de transporte

Completa tu compra!

KNA BP1 banjo pickup
KNA BP1 banjo pickup
60 €
Meinl SB503 Multitool for drums
Meinl SB503 Multitool for drums
21,90 €

Portable bridge-mounted piezo, tailpiece-mounted output jack for banjo

Unlike other banjo pickups, BP-1 offers a unique way of sound capturing and delivers the natural tone from your banjo to your amp or mixing board.

There's a less chance of feedback than a banjo microphone pickup.

Detachable and one of the most portable pickups for banjo, BP-1 conveniently accepts a standard 1/4'' cable.

Acerca de
KNA BP1 banjo pickup
Install with no modification
Install with no modification
The sensor is easily installed on the side of the bridge and no modifications to the instrument are required.
Wooden sensor
Wooden sensor
The piezo sensor has a lightweight wooden casing to achieve maximum tonal sensitivity and transmission.
Natural sound
Natural sound
BP-1 has a passive design that reproduces the natural sound of the instrument with no need for a battery.
Complete installation set
Complete installation set
The pickup comes with additional shims and a microporous rubber slave for fitting the sensor in narrow bridges, and zip ties for attaching the jack housing to the bracket hooks.
Installation guide step 1
Installation guide step 1
BP-1 will function from either side of the bridge. The treble side is more common for right-handed players. Hold the bridge with one hand while installing the BP-1 sensor with the other. The sensor will first touch the bridge with the microporous sleeve. Slightly press on the sleeve to make the opening wider, then slip the BP-1 sensor onto the bridge.
Installation guide step 2
Installation guide step 2
The sensor should stay stable on the bridge. If needed, you may move it toward the bottom of the bridge where the bridge is wider. Hold the sensor carefully with your fingers on both sides and carefully slide it down. The sensor should fit tightly but shouldn’t require force to be placed in position.
Installation guide step 3
Installation guide step 3
For narrower bridges, the provided shims may be required. Peel the protective film off and install on the flat side of the microporous sleeve. For your convenience, stick the shims on the microporous sleeve while it is removed from the sensor. For stable attachment, install as many shims as needed.
Installation guide step 4
Installation guide step 4
Find a suitable place for the jack housing near the tailpiece. Use the included zip ties to attach the jack housing on the bracket hooks.
Installation guide step 5
Installation guide step 5
With the volume off, plug one end of an instrument cable into BP-1 and the other end into your amplification system. Hold the jack housing firmly when attaching and detaching the cable. Enjoy your new pickup and make music!
Especificaciones
KNA BP1 banjo pickup
Specifications
Item weight. Usually given in Kg (or Pounds). Sometimes also other types of indications, such as for drum cymbals, for example.
Weight
17g / 0.6 oz
Diameter of the piezo element
8mm / 0.32"
Thickness of the piezo element
1.8mm +/- 0.10mm 0.07" +/- 0.003"
Indica a impedância do equipamento. Impedância mede a resistência oferecida por um circuito à passagem de sinal elétrico. Apresentada em Ohm.
Impedance
800 Ω
Lead cable from female jack to element
21.5cm / 8.46"

Relacionados

REMO

Parche de Bombo Remo BR-1322-00 Ambassador Clear 22"

36,70 €

En stock

Recomendaciones

DW DRDHGB22K Black 22" Logo Vented Bass Drum head

61 €

En stock
0.0
0 Evaluacións
5 estrellas
 
0%
4 estrellas
 
0%
3 estrellas
 
0%
2 estrellas
 
0%
1 estrella
 
0%
Calidad
Sonido
Comparta su opinión con otros clientes