KNA NG-2 classical guitar pickup

NG-2 installs safely and securely on the classical or flamenco guitar tie block utilizing the tension of the strings.

Players can control their output signal while onstage or in the studio, right from the pickup-mounted volume knob.

The piezo element is encased in elegant and stylish mahogany. The lightweight assembly offers maximum tonal sensitivity.

NG-2 has a passive design that reproduces the natural sound of the instrument with no need for a battery.

Two cables are included — one 9-ft. 1/8" to 1/4" and one 3-ft. 1/8" to female 1/4" jumper with safety clip to connect with your instrument cable.

Loosen the strings of your guitar. Make sure there is enough space under the loops so the pickup can slide through without any pressure.

Slide the pickup under the string loops. Keep it positioned evenly on the tie bar while tightening the strings and retune.

Press the top button to open the safety clip. Insert your instrument cable into the opening and release the button.

Hold the pickup head securely when attaching and detaching the cable. Attach the clip to a suitable part of your instrument strap, belt or belt loop.The jumper cable and safety clip will protect your pickup from accidental damage caused by the cable pulling on the head of the pickup. You are ready to enjoy your new pickup!