The MXR Custom Badass ’78 Distortion is a factory-modded pedal that roars with huge amp stack tones and old school tube amp-like distortion.
We took a classic distortion circuit and hot-rodded it to the next level for over-the-top soaring leads and rich, saturated rhythms. With only three knobs, dialing in Badass tone is a cinch. The CRUNCH button allows you to choose between two different modes of diode and LED clipping, boosting the harmonic content of the distortion.
The ’78 Distortion's wide open amp-like sound sounds great whether it's in front of a clean amp, a slightly dirty amp, or a full on overdriven amp. Under the hood, this high performance machine features top notch circuitry and hardware meant for a lifetime of use.
Features
check_circle_outline
A hot-rodded classic circuit
check_circle_outline
Roars with huge amp stack tones and old school distortion
check_circle_outline
Delivers soaring leads and rich, saturated rhythms
check_circle_outline
CRUNCH button boosts the dynamic range and harmonic content of distortion
check_circle_outline
The MXR Custom Badass ’78 is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ECB003E, or a DC Brick™ power supply.
info_outline Descrição das caracteristicas do Artigo.
Specifications
Input Impedance 1 MΩ
Output Impedance 6 kΩ
Nominal Input Level -22 dBV
Max Output Level Crunch Off -5 dBV Crunch On -2 dBV
Noise Floor* -84 dBV
Distortion Range 27 dB at 500 Hz
Max System Gain 43 dB
Tone Control Tilt EQ ± 4 dB at 100 Hz ± 5 dB at 2 kHz Bypass True Hardwire
Current Draw LEDs Off 2.5 mA LEDs On 6 mA
Power Supply 9 volts DC